Comentarios del lector/a

Energy-saving solutions in office buildings, supermarkets, shopping centers, apartments save safety costs

por Gary Harney (2019-03-22)


Cost effective solution in the building applied by AEON Satisfaction has achieved high efficiency when operating the building. Just by performing a few basic operations, you have significantly reduced your household electricity costs, while adding to minimizing CO2 exhausts to the environment.
Setting up energy saving solution for household appliances:

1 ) Raise the temperature of the refrigerator

Refrigerators ingest about 20% of electricity when compared with most household devices. Guarantee the power cutting down mode switch is always turned on. Check the gaskets around the pantry door to be sure they are clean and tight.

sequel payments on your Place the washing machine in warm or cold normal water mode, avoiding hot rinse function

This will help reduce about 227 kilogram of CO2 for electric heating and 68 kilogram CO2 for gas normal water heating.

3. Make certain that when the bowl is utilized, the bowl must be packed in the container

You are able to turn off the dish drying mode. This will save you 20% of the electricity used for dishwashers.

4. Decrease the temperature of the hot water heater

Instead of setting the temperature to 600C, set 500C. Pertaining to example, if every family reduces the temperature of the hot water fish tank to 100C, we will reduce 45 million lots of CO2 emissions each year.

5. Choose energy-saving products when replacing old appliances

Choose to buy products that are well suited for your family's needs and have energy-saving labels. Pertaining to example, a horizontal competition washer can save 60 per cent to 70% of the water used compared to a vertical cage.
Strength saving solutions in properties effectively.

Energy saving alternatives in buildings effectively.
Strength saving solution in the building for cooling and heating systems:

6. Perform not overuse the heating unit and air conditioner

Simply reducing two degrees of heating in the cold weather will also help reduce 6% of CO2 emissions, corresponding to 191 kg of CO2.

six. Regularly clean and replace filters

The energy lost at conditioning and the heater must work through a dust-covered filter. Washing the filter will save 5% of energy and minimize 80 kg of CO2 emissions.

8. Work with economical compact ball to give best light impact

Although the investment price from the head is bigger than the normal lamp, the compact ball is calculated in a long time, it will probably be more economical due to only using 1/4 power and with a life span of 8-12 times higher than the ball. Regular lights that still provide the same brightness. Once lighting a normal light bulb, only 10% of the electricity can be used to light up and the 90% of the electricity is merely used to make the bulb warm up.

9. Insulation of hot water systems costs only 10-20 USD but will save 450 kg of gas for hot normal water heating

10. Use less hot water by putting in a nozzle to regulate drinking water flow

It costs about 10-20 USD but actually will reduce about 600 kg of CO2 exhausts annually and save 2 hundred kg of gas.

14. Self-air conditioning in your building

Cover air water leaks on windows or gates. This is only about $ 1 per home window and will reduce two, 500 kg of CARBON DIOXIDE emissions. Ask the in order to perform an energy audit to verify if your home uses energy effectively. This service may be free or usually a very small price.
Inexpensive solution in the dual building with moving

doze. Should walk, bike, carpool or use public tools whenever possible

For example, if your automobile is 30 kilometres away, it will take in 3. 8 liters of gasoline, you could reduce 3, 200 kg of CARBON each year.

13. The moment conditions are available for new vehicles, choose a fuel-efficient model

Instead of spending 3. 8 lt of gasoline only 35 km away, if your car is 64 kilometres away and the gasoline consumption is equivalent and you go 16, 1000 km per year, you will reduce about six, 000 kg of CARBON DIOXIDE emissions waste.
Energy keeping solutions in the home: reduce, reuse, recycling

16. Reduce the amount of domestic waste

By key to minimize the use of pre-packaged products or use reusable and recyclable products. Cutting or taking every kilo of squander out in the environment, you will save energy and minimize at least zero. 5 kg of CARBON emissions.

15. If your car has air fitness installed, recycle the refrigerant of this system

Seapage from the car air conditioning method is the key cause of CFC emissions, a substance that causes punctures of the ozone coating and causes a temperatures rising a result of the earth. This CFC is the same as practically 10 tons of CARBON DIOXIDE emissions per year.
Make your building renovation to save energy, please apply the following solutions:

16. Efficiency for walls and roofing

This reduces energy costs by 20% to thirty percent and reduces 300 kilogram to 2, giai phap tiet kiem nang luong 500 kilogram of CO2 emissions each year

17. Modernizing the window system

Replace traditional door samples with 2-layer glass doors. Employing this goblet window can reduce two. 4 tons of CARBON DIOXIDE annually for heating gas apartments, 3. 9 plenty for oil heating systems and 9. 8 plenty for electric heating systems.
18. Planting trees and light-colored walls

If you are in hot climates or paint in dark colors, you are in a cool climate. Reducing energy ingestion by utilizing the tone of trees using appropriate paint colors will help you reduce up to installment obligations on your 4 loads of CO2 per season.

Energy saving solution in the building for transact and community work:

nineteen. Propose your boss to install energy-efficient equipment and practice energy-saving measures and minimize workplace emissions.

Become on the market or attend local societies and teams and work with authorities to apply these measures in schools and public Works buildings.

20. Address with local and national environmental authorities, exhibiting your thoughts about energy efficiency and conservation as well as environmental obstructions.